MOTORS

Take your EZGO golf cart to the next level with a Navitas DC to AC conversion kit. The Navitas TAC2 DC to AC kit is engineered to significantly increase your golf carts torque, top speed and acceleration.  Easily adjust your acceleration, maximum speed and regenerative braking with the turn of a knob using the included on-the-fly (OTF) programmer or review your carts diagnostic data using the Bluetooth enabled app. The Navitas TAC2 600A 48V-72V DC to AC Conversion Kit includes is a fully-programmable 600A AC controller with a 5 KW Navitas AC motor and an On-The-Fly Programmer. This kit also includes an OEM direct Connector, mounting plate and a auxiliary harnessing for a hassle free installation. The kit is compatible with Curtis 1206HB or 1268 ITS OEM controllers. Kit Features: 600A state of the art Mosfet technology Bluetooth programmable w/mobile app Fully sealed IP5X Motor thermal protection OEM multi-platform mounting options One button cart lock-out On-The-Fly (OTF) programming Regenerative braking Rollback protection Speed-limiting ability Thermal protection Variable acceleration rate Variable maximum speed control Variable regen control Kit Includes: EZGO TXT (Curtis 1206HB) TAC2 Controller 600A w/ Bluetooth TAC2 TXT48 Curtis 1206HB Module (Installed) OTF1.0 Programmer (3.75m cable) Hardware Mounting Kit Navitas 5KW (19T) AC Motor AC Motor Phase Cable Motor Sensor Cable Run/Tow Switch Mounting Plate EZGO S4/L6/MPT (Curtis 1268 ITS) TAC2 Controller 600A w/ Bluetooth TAC2 Curtis 1268 ITS Module (Installed) OTF1.0 Programmer (3.75m cable) Navitas 5KW (19T) AC Motor AC Motor Phase Cable Motor Sensor Cable Hardware Mounting Kit Battery Voltage: 48 - 72 Volts Output Capability: 600A 5 KW Navitas AC Motor Features High performance AC induction motor External speed sensor Internal Temperature sensor Steel and aluminum construction High torque & speed 5 KW Navitas AC Motor Technical Specifications Type of Motor: AC Induction Rated Power: 5KW Rated Voltage: 34V (AC) Rated Current: 113A RPM: 0~5785 r/min Splines: 19 Insulation Class: H Protection Mode: IP44

Read more less

Take your Club Car golf cart to the next level with a Navitas DC to AC conversion kit. The Navitas TAC2 DC to AC kit is engineered to significantly increase your golf carts torque, top speed and acceleration.  Easily adjust your acceleration, maximum speed and regenerative braking with the turn of a knob using the included on-the-fly (OTF) programmer or review your carts diagnostic data using the Bluetooth enabled app. The Navitas TAC2 600A 48V-72V DC to AC Conversion Kit includes is a fully-programmable 600A AC controller with a 5KW Navitas AC motor and an On-The-Fly Programmer. This kit also includes an OEM direct Connector, mounting plate and a auxiliary harnessing for a hassle free installation. The kit is compatible with Curtis 1510-1515 or 1268 non-ITS OEM controllers. This controller is compatible with 2001-2021 Club Car Models and is not compatible with 2022 and newer models. Kit Features: 600A state of the art Mosfet technology Bluetooth programmable w/mobile app Fully sealed IP5X Motor thermal protection OEM multi-platform mounting options One button cart lock-out On-The-Fly (OTF) programming Regenerative braking Rollback protection Speed-limiting ability Thermal protection Variable acceleration rate Variable maximum speed control Variable regen control Kit Includes: Club Car IQ/Precedent/Excel/Onward (Curtis 1510-1515) TAC2 Controller 600A w/ Bluetooth TAC2 Club Car Curtis 1510/1515 Module (Installed) OTF1.0 Programmer (3.75m cable) Hardware Mounting Kit Navitas 5KW (10T) AC Motor AC Motor Phase Cable Motor Sensor Cable Club Car Carryall(Curtis 1268 non-ITS) TAC2 Controller 600A w/ Bluetooth TAC2 Curtis 1268 non-ITS Module (Installed) OTF1.0 Programmer (3.75m cable) Navitas 5KW (10T) AC Motor AC Motor Phase Cable Motor Sensor Cable Hardware Mounting Kit Battery Voltage: 48 - 72 Volts Output Capability: 600A 5KW Navitas AC Motor Features High performance AC induction motor External speed sensor Internal Temperature sensor Steel and aluminum construction High torque & speed 5 KW Navitas AC Motor Technical Specifications Type of Motor: AC Induction Rated Power: 5KW Rated Voltage: 34V (AC) Rated Current: 113A RPM: 0~5785 r/min Spines: 19 Insulation Class: H Protection Mode: IP44

Read more less

Take your Yamaha golf cart to the next level with a Navitas DC to AC conversion kit. The Navitas TAC2 DC to AC kit is engineered to significantly increase your golf carts torque, top speed and acceleration. The navitas TAC2 DC to AC kit is compatible with both G29 Drive and Drive 2 DC models. Easily adjust your acceleration, maximum speed and regenerative braking with the turn of a knob using the included on-the-fly (OTF) programmer or review your carts diagnostic data using the Bluetooth enabled app. The Navitas TAC2 600A 48V-72V DC to AC Conversion Kit includes is a fully-programmable AC controller with a 4KW Navitas AC motor and an On-The-Fly Programmer. This kit also includes an OEM direct Connector, mounting plate and a auxiliary harnessing for a hassle free installation. Features: 600A state of the art Mosfet technology Bluetooth programmable w/mobile app Fully sealed IP5X Motor thermal protection OEM multi-platform mounting options One button cart lock-out On-The-Fly (OTF) programming Regenerative braking Rollback protection Speed-limiting ability Thermal protection Variable acceleration rate Variable maximum speed control Variable regen control 2 rows of pins Kit Includes: TAC 2 Controller 600A w/ Bluetooth TAC2 G29 Moric Module (Installed) OTF1.0 Programmer (3.75m cable) Navitas 4KW (19T) AC Motor AC Motor Phase Cable Motor Sensor Cable 4 Ring Terminal for A2 Cable Hardware Mounting Kit Battery Voltage: 48 - 72 Volts Output Capability: 600A 4 KW Navitas AC Motor Technical Specifications High performance AC induction motor External speed sensor Internal Temperature sensor Steel and aluminum construction High torque & speed Type of Motor: AC Induction Rated Power: 4KW Rated Voltage: 34V (AC) Rated Current: 91A RPM: 0~6800 r/min Insulation Class: H Protection Mode: IP44

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP.  FSIP motors require a 3 position Deutsch plug speed sensor cable, 221-SSCABLE, sold separately. *Speed sensor cable not needed for E-Z-GO DCS

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP.  FSIP motors require a 3 position Deutsch plug speed sensor cable, 221-SSCABLE, sold separately. *Speed sensor cable not needed for E-Z-GO DCS

Read more less

E-Z-GO, Yamaha, and Star vehicles require the 3 position Deutsch plug speed sensor cable, 221-SSCABLE, when pairing FSIP motors to 1268 conversion kits (Sold seperately). Yamaha vehicles require adaptor harness 51-YAM-YDRE when pairing FSIP motors to stock or non-1268 conversion kits (Sold seperately) FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP.  E-Z-GO, Yamaha, and Star vehicles require the 3 position Deutsch plug speed sensor cable, 221-SSCABLE, when pairing FSIP motors to 1268 conversion kits (Sold seperately).

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP.

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP. E-Z-GO, Yamaha, and Star vehicles require the 3 position Deutsch plug speed sensor cable, 221-SSCABLE, when pairing FSIP motors to 1268 conversion kits (Sold seperately). Yamaha vehicles require adaptor harness 51-YAM-YDRE when pairing FSIP motors to stock or non-1268 conversion kits (Sold seperately)  FSIP motors require a 3 position Deutsch plug speed sensor cable, 221-SSCABLE, sold separately.

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP.

Read more less

FSIP motors are designed to be paired with Navitas TSX Controls and FSIP's 500 amp FX Controllers. This motor cannot be used with stock vehicle controllers. Performance motors require an upgraded controller or conversion kit to operate correctly. FSIP can offer credit/replacement only if there is a warranty issue, which will be determined by a full evaluation after it has been returned to FSIP. E-Z-GO, Yamaha, and Star vehicles require the 3 position Deutsch plug speed sensor cable, 221-SSCABLE, when pairing FSIP motors to 1268 conversion kits (Sold seperately). Yamaha vehicles require adaptor harness 51-YAM-YDRE when pairing FSIP motors to stock or non-1268 conversion kits (Sold seperately)  FSIP motors require a 3 position Deutsch plug speed sensor cable, 221-SSCABLE, sold separately.

Read more less

3 position Deutsch speed sensor cable for use with FSIP Performance Motors when paired with 1268 conversion kits.

Read more less